********************************************************************************
SMCIPMITool v1.5.7                                                    10/09/2009
Copyright(c) 2009 by Super Micro Computer, Inc.           http://supermicro.com/
********************************************************************************

========
1.Readme
========

SMCIPMITool is a command line interface utility for the Supermicro SuperBlade
and IPMI device. 

=====================
2.Setup and Execution
=====================

This utility needs Sun JRE 1.5.x or above. Please install Sun Java in your 
platform in advance. To download, please go to following link:
http://java.sun.com/javase/downloads/index.jsp

There are 3 executable files in the SMCIPMITool utility.
 1.SMCIPMITool.jar   : A jar file only. 
 2.SMCIPMITool.exe   : A windows executable wrapper for SMCIPMITool.jar
 3.SMCIPMITool-linux : A linux executable wrapper for SMCIPMITool.jar
 
User can choose the jar or a native executable file. SMCIPMITool-linux needs
an extra setting to the environment, as shown below.

Add jre to your PATH line in .bashrc file
  PATH=$PATH:/usr/java/jre1.5.0_12/bin 
The "jre1.5.0_12" folder may change depending on your version of java.

===================
3.Usage and Command
===================

In the console mode, please run the following command to start. There will be 
on-line help included.

Usage:
      SMCIPMITool <IP> <username> <password> [commands ... ]
      
Following are all commands for SMCIPMITool. 
Command: Main available commands
Available command(s):
system(sys)                      System status overview
failure(fail)                    Blade system failure report
blade(bl)                        Server blade management
gigabit(gb)                      Gigabit switch management
power(ps)                        Power supply management
ib                               Infiniband management
cmm                              CMM management
listtemp(lst)                    List system temperatures
sel                              System event log
user                             User management
vm                               Virtual Media management
ipmi                             IPMI device management
ver                              Print version
ch                               Change managed device in shell mode
list [keyword]                   List all or find available commands
find [<Start> <End> <netMask>]   Find IPMI device from local or IP range
found [clear]                    List or clear found IPMI devices
exec <filename> [loop] [delay]   Execute commands from file
host                             Host management
hostrun <host|group> <command>   Run a command on host or group
trap                             IPMI SNMP Trap receiver management
sc                               Execute DOS/Linux shell command
dr                               Drive redirection
kvm                              Open KVM console (graphic mode)
kvmw                             SIMSOW KVM console (graphic mode)
vmw                              SIMSOW Virtual Media
sol                              SOL Commands

Command: blade
Available command(s):
status(st)                       Blade status
<blade index(es)>                Index number of blade

Command: blade <blade index(es)>
Available command(s):
status(st)                       Blade status
power                            Power control
kvm                              Request KVM switch
uid                              on/off UID LED
sensor(sr)                       Sensors status
bmc                              BMC(SIMBL) LAN configuration
config                           Blade motherboard configuration

Command: blade <blade index(es)> bmc
Available command(s):
ip [IP]                          Get/set BMC IP
dhcp [enable|disable]            Enable/Disable DHCP
vlan [<enable|disable> <tag>]    Display/Enable/Disable VLAN
ipmb <netFn> <cmd> [data]        Send IPMI raw command. netFn<<2 is needed

Command: gigabit
Available command(s):
status(st)                       Gigabit switch status
<gigabit index(es)>              Index number of gigabit switch

Command: gigabit <gigabit index(es)>
Available command(s):
status(st)                       Gigabit Switch status
power                            Power control
wss                              WSS web configuration

Command: power
Available command(s):
status(st)                       Power supply status
<power index(es)>                Index number of power supply

Command: power <power index(es)>
Available command(s):
status(st)                       Power Supply status
power                            Power supply power control
fan                              Power supply fan control

Command: ib
Available command(s):
status(st)                       Infiniband status
<ib index(es)>                   Index number of Infiniband switch

Command: ib <ib index(es)>
Available command(s):
status(st)                       Infiniband status
power                            Infiniband power control

Command: cmm
Available command(s):
status(st)                       CMM status
<cmm index>                      Index number of a CMM

Command: cmm <cmm index>
Available command(s):
status(st)                       CMM status
dtime [datetime]                 Get/Set CMM date/time
ntp <UTC offset> <NTP1> [NTP2]   Sync time with NTP servers
reset                            Reset CMM
flash <filename>                 Flash CMM firmware
ver                              CMM firmware version
ip [ip]                          Get/Set IP. Format:###.###.###.###
mac [mac]                        Get/Set MAC. Format:##:##:##:##:##:##
gateway [gateway_IP]             Get/Set gateway. Format:###.###.###.###
netmask [netmask]                Get/Set netmask. Format:###.###.###.###
syncfg                           Sync configuration to slave CMM
opmode [mode]                    Get/Set CMM OP mode. 0:Enterprise, 1:Office

Command: sel
Available command(s):
info                             System event log information
list                             List system event log
clear                            Clear system event log

Command: user
Available command(s):
add                              Add user
list                             List user
delete                           Delete user
level                            Update user level
test                             Test login

Command: vm
Available command(s):
status(st)                       Virtual media status
stop                             Stop virtual media
floppy                           Upload a floppy image as virtual media
iso                              Virtual media via windows share

Command: ipmi
Available command(s):
sensor(sr)                       Sensor status
power                            Power control
acpi                             ACPI status
lan                              LAN configruation
fru                              FRU information
oem                              OEM Commands
reset                            Reset BMC
ver                              IPMI device version
flash <filename>                 Flash SIM IPMI firmware
flashw <filename>                Flash SIMSOW IPMI firmware
raw <netFn> <cmd> [data]         Send IPMI raw command. netFn<<2 is needed

Command: ipmi lan
Available command(s):
ip [ip]                          Get/Set IP. Format:###.###.###.###
mac [mac]                        Get/Set MAC. Format:##:##:##:##:##:##
gateway [gateway_IP]             Get/Set gateway. Format:###.###.###.###
netmask [netmask]                Get/Set netmask. Format:###.###.###.###
snmp [<seq> <ip> [mac]]          Get/Set SNMP destination
snmpcomm [community string]      Get/Set SNMP community string
arp [on|off]                     On/Off Gratuitous ARP
dhcp [enable|disable]            Enable/Disable DHCP
vlan [<enable|disable> <tag>]    Display/Enable/Disable VLAN

Command: ipmi oem
Available command(s):
clrint                           Clear chassis Intrusion
id                               MB ID. Only available for SIMxx IPMI
uid [on|off]                     On/Off UID LED
backup <filename>                Configuration backup to file
restore <filename> <option>      Configuration restore from file

Command: host
Available command(s):
list                             List host data
reload                           Reload host data
add <host> <ip> [username] [password]    Add a host
remove <host>                    Remove a host
rename <old name> <new name>     Rename a host
group                            Host group data management

Command: host group
Available command(s):
add <group> [host] ...           Add a host group
remove <group>                   Remove a host group
rename <old name> <new name>     Rename a host group
addhost <group> <host> ...       Add a host into group
removehost <group> <host> ...    Remove a host from group

Command: trap
Available command(s):
start                            Strat Trap receiver
stop                             Stop Trap receiver
status(st)                       Trap receiver status
list                             List the received Traps
clear                            Clear the received Traps
save                             Save the received Traps to file
savepet                          Save as the IPMIView TrapReceiver PET format
				
===========
4.Examples
===========

D:\>SMCIPMITool 192.168.1.112 ADMIN ADMIN system
Blade Module (10/10)
--------------------
 Blade    | Power  | KVM      | UID | Error | BMC | Watt
 -----    | -----  | ---      | --- | ----- | --- | ----
 Blade 1  | On     |          |     |       | Yes | 300W
 Blade 2  | On     |          |     |       |     | 300W
 Blade 3  | On     |          |     |       | Yes | 300W
 Blade 4  | On     |          |     |       | Yes | 375W
 Blade 5  | On     |          |     |       | Yes | 300W
 Blade 6  | On     |          |     |       |     | 300W
 Blade 7  | On     | Selected |     |       | Yes | 300W
 Blade 8  | On     |          |     |       | Yes | 300W
 Blade 9  | On     |          |     |       | Yes | 300W
 Blade 10 | On     |          |     |       | Yes | 300W

Gigabit SW Module (1/2)
------------------------
 GBSW   | Power | Error | Init |   Switch |   2.5V |  1.25V
 ----   | ----- | ----- | ---- |   ------ |   ---- |  -----
 GBSW 1 | On    |       | OK   |  37C/99F | 2.512V |   1.2V

Power Supply Module (4/4)
--------------------------
 PS   | Power | Fan 1 | Fan 2 | Temp.    | Watts |     DC |     AC | F/W | FRU
 --   | ----- | ----- | ----- | -----    | ----- |     -- |     -- | --- | ---
 PS 1 | On    |  6183 |  6068 | 38C/100F |  2000 |    N/A |    N/A | 2.6 |  01
 PS 2 | On    |  6183 |  6183 | 38C/100F |  2000 |    N/A |    N/A | 2.6 |  01
 PS 3 | On    |  6068 |  6068 | 39C/102F |  2000 |    N/A |    N/A | 2.6 |  01
 PS 4 | On    |  6068 |  6068 | 41C/106F |  2000 |    N/A |    N/A | 2.6 |  01

Infiniband Module (1/2)
------------------------
 IB   | Power | Init |  VVDD | 3.3V Aux |  1.2V |  1.8V |  3.3V |   Temp.
 --   | ----- | ---- |  ---- | -------- |  ---- |  ---- |  ---- |   -----
 IB 1 | On    | OK   | 1.52V |    3.31V | 1.19V | 1.74V | 3.31V | 34C/93F

CMM Module(1/2)
----------------
 CMM   | M/S    | Status
 ---   | ---    | ------
 CMM 1 | Master | OK


D:\>SMCIPMITool 192.168.1.238 ADMIN ADMIN blade 1 sensors
  Status | Sensor               |      Reading | Low Limit | High Limit |
  ------ | ------               |      ------- | --------- | ---------- |
  OK     | CPU1 Temp.           |     50C/122F |       N/A |   80C/176F |
  OK     | CPU2 Temp.           |     43C/109F |       N/A |   80C/176F |
  OK     | CPU3 Temp.           |     47C/117F |       N/A |   80C/176F |
  OK     | CPU4 Temp.           |     46C/115F |       N/A |   80C/176F |
  OK     | System Temp.         |     43C/109F |       N/A |   75C/167F |
  OK     | CPU1 Voltage         |       1.34 V |    0.92 V |      1.5 V |
  OK     | CPU2 Voltage         |       1.32 V |    0.92 V |      1.5 V |
  OK     | CPU3 Voltage         |       1.23 V |    0.92 V |      1.5 V |
  OK     | CPU4 Voltage         |       1.29 V |    0.92 V |      1.5 V |
  OK     | 1.2V                 |       1.19 V |    1.08 V |     1.32 V |
  OK     | 3.3V                 |       3.18 V |    2.96 V |     3.63 V |
  OK     | 12V                  |      11.42 V |   10.75 V |    13.25 V |
  OK     | 5V                   |       4.92 V |    4.49 V |      5.5 V |
  OK     | 5VSB                 |       4.82 V |    4.49 V |      5.5 V |
  OK     | Battery              |       3.05 V |    2.96 V |     3.63 V |


Shell mode example
D:\>SMCIPMITool 192.168.1.238 ADMIN ADMIN shell
Press Ctrl+D or "exit" to exit
Press "?" or "help" for help
Press TAB for command completion
Press UP and DOWN key for command history

CMM>blade status
Blade Module (5/10)
--------------------
 Blade    | Power  | KVM      | UID | Error | BMC | Watt
 -----    | -----  | ---      | --- | ----- | --- | ----
 Blade 1  | On     |          |     |       | Yes | 500W
 Blade 4  | On     |          |     |       | Yes | 475W
 Blade 6  | On     |          |     |       | Yes | 200W
 Blade 8  | On     |          |     |       | Yes | 175W
 Blade 10 | On     | Selected |     |       | Yes | 475W

CMM>vm iso 1 192.168.10.43 iso cd1.iso
done
CMM>vm status

Drive 1
Device Status = CD-ROM image on Windows share set
Image Size = 522766336 (bytes)
Access Mode = Read-Only
Image source = //192.168.10.43/iso/cd1.iso


Drive 2
Device Status = CD-ROM image on Windows share set
Image Size = 522766336 (byte)
Access Mode = Read-Only
Image source = //192.168.10.43/iso/cd1.iso

CMM>sel info
Total Entries:          256
SEL Version:            1.5
Free Space:             4096 bytes
Recent Entry Added:     Pre-Init 00:00:00
Recent Entry Erased:    Pre-Init 00:00:00

==============
5.Release note
==============

 -------------------------------------------------------------------------------
  Version 1.5.7 build 091009
 -------------------------------------------------------------------------------

 1. Added IBQDR
 2. Updated BHQIE sensors' formula

 -------------------------------------------------------------------------------
  Version 1.5.6 build 090810
 -------------------------------------------------------------------------------
 
 1.Rebuild from 1.5.5. Fixed the missed files.

 -------------------------------------------------------------------------------
  Version 1.5.5 build 090804
 -------------------------------------------------------------------------------

 1. Added assertion and deassertion type in trap receiver
 2. Updated pmInfo command for supporting {0xb0,0x78,0x7a,0x7c,0x7e} slave address
 3. Updated pmInfo command (fomula of power watts)
 4. Added B8DTL-E and B8DTL-L
 5. Updated PEF table for ATEN's fw
 6. Fixed a bug that cannot receive trap which send by ATEN's fw
 7. Added delete sdr command
    Command: delsdr <SDR record ID>           Delete SDR
    ex:delsdr 10
 8. Added BHQIE sensor's table    

 -------------------------------------------------------------------------------
  Version 1.5.4 build 090601
 -------------------------------------------------------------------------------
 1. Added PMBus command for getting power supply health info
            pminfo [<busId> <SlaveAddr>]     PMBus health
 Example:          
 SIMBL>pminfo
  Item                           |                Value
  ----                           |                -----
  Status                         |          [Status OK]
  AC Input Voltage               |               97.5 V
  AC Input Current               |               1.43 A
  DC 12V Output Voltage          |              12.09 V
  DC 12V Output Current          |                9.5 A
  Temperature 1                  |              33C/91F
  Temperature 2                  |             38C/100F
  Fan 1                          |             9847 RPM
  DC 12V Output Power            |                114 W
  AC Input Power                 |                133 W
  PMBus Revision                 |               0x0001
  PWS Serial Number              |      P7211C914IT0835
  PWS Module Number              |          PWS-721P-1R
  PWS Revision                   |               REV1.0 
                        
 2. Updated memory ecc SEL for X8 series board

 -------------------------------------------------------------------------------
  Version 1.5.3 build 090420
 -------------------------------------------------------------------------------
 1. Updated Blade HW configuration
 2. Updated B8DT6/E sensor's table
 3. Added SEL event for CPU temp overheat
 4. Added B8DT6/E sensor's table
 5. Updated SNMP setting for AMI's new FW update
 6. Added IPMB raw command for KIRA and Winbond

 -------------------------------------------------------------------------------
  Version 1.5.2 build 090302
 -------------------------------------------------------------------------------
 1. Updated SNMP setting for AMI's new FW update
 2. Added IPMB raw command for KIRA and Winbond
 3. Added UID function for AMI
 4. Added sensor number in IPMI sensor command

 -------------------------------------------------------------------------------
  Version 1.5.1 build 090204
 -------------------------------------------------------------------------------

 1. Added more info for ECC and PCI error SEL event
 2. Added DHCP command into CMM cmd category

 -------------------------------------------------------------------------------
  Version 1.5.0 build 081231
 -------------------------------------------------------------------------------

 1. Added KVM,Virtul Media and Flash command for Hermon (SIMSOW)
    a.PlugIn Command: "kvmw" for KVM Window mode
    b.PlugIn Command: "vmw" for virtual Media
          vmw floppy <image file>          Floppy image as virtual media
          vmw usbkey <drive letter>        USB key as virutal media
          vmw iso    <ISO file>            ISO file as virtual media
          vmw cd     <drive letter>        CD/DVD drive as virutal media
          vmw stopFloppy                   Stop connected floppy
          vmw stopUsbkey                   Stop connected USBKey
          vmw stopISO                      Stop connected ISO
          vmw stopCD                       Stop connected CD/DVD
          vmw status(st)                   Virtual Media status
    c."ipmi flashw" command for Hermon fw flashing

 2. Updated SNMP pef table for AMI in "ipmi lan snmp" command
 3. Added SIMBL(W) guid
 4. Updated SNMP Destination count
 5. Added AMD CPU in the blade info (motherboard configuration)
    Command list:
      bl <blade Index> config
 6. Fixed user ID cannot be deleted in AMI's fw
 7. Fixed CPU not installed display error in AMI's fw
 8. Renamed SuperBladeTool to SMCIPMITool. Since it supports both SuperBlade and IPMI products
 9. Added B7DCL sensor table

 -------------------------------------------------------------------------------
  Version 1.04.13 build 080908
 -------------------------------------------------------------------------------

 1. Added 10G pass Thru management status in sys command

 -------------------------------------------------------------------------------
  Version 1.04.12 build 080812
 -------------------------------------------------------------------------------

 1. Updated winbond GUIDs. Includes both on-board and add-on types.
 2. Updated the blade sensors threshold reading. The blade CPU and system threshold
    temperature are read from BIOS setting.
 3. Added new CPU text temperature status (low, medium, high and overheat status)
 4. Added pulse diagnostic interrupt command
    Command:
    CMM>ipmi power diag

 -------------------------------------------------------------------------------
  Version 1.04.11 build 080718
 -------------------------------------------------------------------------------
 
 1. Added B7DC3-IB supported
 2. Added motherboard configuration command
           Command list:
           bl <blade Index> config
           CMM>bl 7 config
             MB ID           = B1
             Pwr Consumption = 300W
             CPUs            = 1
             CPU Type        = Dempsey B1
             CPU Speed       = 3.00Ghz
             DIMMs           = 1
             Memory Size     = 1024MB
             Memory Speed    = 667Mhz
             LANs            = 2
             LAN 1 MAC       = 01:00:02:00:00:00
             LAN 2 MAC       = 01:00:02:00:00:01

 -------------------------------------------------------------------------------
  Version 1.04.10 build 080623
 -------------------------------------------------------------------------------

 1. Changed display of power supply watts (1400 -> 1400/1200) when power is off
 2. SIMSO-W+ added

 -------------------------------------------------------------------------------
  Version 1.04.09 build 080613
 -------------------------------------------------------------------------------

 1. Changed display of power supply watts (1400 -> 1400/1200)
 2. Added Office blade and Enterprise blade mode

 -------------------------------------------------------------------------------
  Version 1.04.07 build 080515
 -------------------------------------------------------------------------------

 1. Added retry mechanism for IPMB call. Make IPMB call more stable

 -------------------------------------------------------------------------------
  Version 1.04.06 build 080508
 -------------------------------------------------------------------------------

 1.Changed 1.8V to Memory Voltage and changed low limit to 1.34v.
 2.Fixed a false alarm of cpu 2 core A temp and cpu2 core B temp.
   It shows "CPU2 Core A Temp:Reading out of range" on fail command
   when you install 2 CPUs with PECI feature.

 -------------------------------------------------------------------------------
  Version 1.04.05 build 080430
 -------------------------------------------------------------------------------

 1.Added function for setting SIMBL VLAN and DHCP function via IPMB from CMM
 2.Added function for sending IPMI raw command via IPMB from CMM

    Command:bl <blade_index> bmc
    Available command(s):
      ip [IP]                          Get/set BMC IP
      dhcp [enable|disable]            Enable/Disable DHCP
      vlan [<enable|disable> <tag>]    Display/Enable/Disable VLAN
      ipmb <netFn> <cmd> [data]        Send IPMI raw command. netFn<<2 is needed

 3.Added DOS/Linux shell command supported.
    Examples:
      CMM>sc dir (execute dir command in Windows OS)
      CMM>sc ls (execute ls command in Linux OS)
      CMM>sc ping 192.168.10.123 (execute ping command)

 -------------------------------------------------------------------------------
  Version 1.04.04 build 080418
 -------------------------------------------------------------------------------
 1.Added Display/Enable/Disable VLAN command
   ipmi lan vlan [<enable|disable> <VLAN tag>]
 2.Added Get/Set SNMP community string command
   ipmi lan snmpcomm [community string]
 3.Added support for BHDME MB

 -------------------------------------------------------------------------------
  Version 1.04.03 build 080331
 -------------------------------------------------------------------------------
 1.Updated virtual media function for i2c lan type
  
 -------------------------------------------------------------------------------
  Version 1.04.02 build 080329
 -------------------------------------------------------------------------------
 1.Added configuration backup/restore/sync functions
   Command list:
      ipmi oem backup
      ipmi oem restore
      cmm 1(or 2) syncfg
 2.Added "delay" command in the shell mode
 3.Added a workround for B7DC3/B7DCE shows SIMBL is installed while it first 
   pluged into middle plane and powered off.
 4.Updated B7DCE,H8DMT,B7DC3,X7SBT,X7SBU in "IPMI OEM ID" command
 5.Updated power supply current. Dividing dc output current by 2.
 6.Added checker for firmware which doesn't support virutal media
 7.Fixed a minor bug in ch command. (Some variables are not cleared)
 8.Set chunk size to 80 byte if lan type is share lan1 and lan driver is i2c for
   firmware upload.
 9.Changed the sensor name 1.2V to CPU VTT (Low/hight limit, 0.99/1.32) in Intel
   blade sensor table.
10.Fixed GBSW dispaly power on while the power supply is turned off
 
 -------------------------------------------------------------------------------
  Version 1.04.01 build 080125
 -------------------------------------------------------------------------------

 1.Added tab-completion function like bsh or windows command pormpt
 2.Added function that persistence command history. Command History
  will restore when re-enter shell mode. (Use the Jline)

  Set history in the SMCIPMITool.properties
  history = on|off
  if history = on, the all the command history will be save to file and
  restore when next shell mode.

 3.Added firmware flash command for SIMXX IPMI
 4.Define command return code in Command class.
   sub Commands can define their own command return code.
   Script program knows the command result form the command return code.
 5.Updated CMM NTP time set function
 6.Updated ch command to accpet ".192" type. Not only accept "*.192".
 
 -------------------------------------------------------------------------------
  Version 1.03.04 build 080118
 -------------------------------------------------------------------------------

 1.Add Command History available in Linux terminal. Pressing up or down key to
   go through command history. This is completed by adding Jline open source project
   
 Note: For SOL function work properly, SOL PlugIn(sol related functions) should 
       use this version.

 -------------------------------------------------------------------------------
  Version 1.03.03 build 080109
 -------------------------------------------------------------------------------

 1.Added a checker to check the SEL and SDR mismatch problem
 2.Added 14 blades Supported
 3.Added 'help' command in the exec mode. (help observe the run time information)
 4.Fixed some trap function bugs. (File close, parameter validation)
 5.Update trap reciever for blade snmp

 -------------------------------------------------------------------------------
  Version 1.03.02 build 071128
 -------------------------------------------------------------------------------

 1.Added PlugIn mechanism.
 2.Updated the gb pass thru initialized display error
 3.Added Virtual Media supported for general SIM IPMI

 -------------------------------------------------------------------------------
  Version 1.03.01 build 071126
 -------------------------------------------------------------------------------
 1.Added cmm NTP fucntion. 
           command:ntp <UTC offset> <NTP1> [NTP2]  Sync time with NTP servers
 2.Added Trap receive function in shell mode. 
          Command:trap
          Available command(s):
          start                            Strat Trap receiver
          stop                             Stop Trap receiver
          status(st)                       Trap receiver status
          list                             List the received Traps
          clear                            Clear the received Traps
          save                             Save the received Traps to file
          savepet                          Save as the IPMIView TrapReceiver PET format
           
		  *Set trap receive in the SuperBladeTool.properties
          trap = on|off
          if trap = on, then trap receive will be started when enter to shell mode

 3.Added reading and threshold in SEL
 4.Fixed the sensor name display error in the SEL list
 5.Added keyword function in list command
 6.Added record function. set "reocrd" field in the SuperBladeTool.properties.
   *Set record in the SuperBladeTool.properties
   record = on|off
   if record = on, the  all the content of shell mode will be record to file
 8.Fixed a bug that GB Switch initilized field display error on SuperBladeTool

 -------------------------------------------------------------------------------
  Version 1.02.01 build 071105
 -------------------------------------------------------------------------------

 1.Added exec command for executing commands from a file  
   (Command: exec <filename> [loop] [delay])
 2.Added all("*") and comma separater for multiple execution on blade, gigabit, 
   power, ib commands. (see example 2)
 3.Added host and group data management. A host.properties file will be created.
 4.Added hostrun command. for running a command on a host or a group (see example 1)
 5.Imporved command list information.
 6.Fixed a bug that no prompt when connect to OSA IPMI  
   
   Examples:
   1.host and hostrun command:
           CMM>host list
           Host:
                   Host                 IP
                   ----                 --
                   1.112                (192.168.1.112)
                   1.119                (192.168.1.119)
                   bl1                  (192.168.10.243)
                   bl2                  (192.168.10.244)
 
           Host Group:  
                   Group Name           Host
                   ----------           ----
                   1                    1.112
                                        1.119
                   bl                   bl1
                                        bl2
 
           CMM>hostrun bl ipmi power up
           [bl1:192.168.10.243]
           Done
 
           [bl2:192.168.10.244]
           Done

         
   2."*" and comma separater support for blade commands:
           CMM>bl 3,7,10 uid on
           [ 3]:
           Done
           [ 7]:
           Done
           [10]:
           Done

           CMM>bl * power on
           [ 1]:
           Blade 1 is not present
           [ 2]:
           Blade 2 is not present
           [ 3]:
           Done
           [ 4]:
           Blade 4 is not present
           [ 5]:
           Blade 5 is not present
           [ 6]:
           Blade 6 is not present
           [ 7]:
           Done
           [ 8]:
           Blade 8 is not present
           [ 9]:
           Blade 9 is not present
           [10]:
           Done



 -------------------------------------------------------------------------------
  Version 1.01.02 build 071022
 -------------------------------------------------------------------------------
 1.Added FOUND [clear] sub command and information of last update.
 2.Added IPMI oem command
     2.1 Added clear chassis intrusion command (command: ipmi oem clrint)
     2.2 Added id command for showing MB ID (command: ipmi oem id)
     2.3 Added id name command for showing MB name (Command: ipmi oem id name)
 3.Fixed a bug that impi raw command cannot accpet the prameter which the msb=1  
 4.Added listtemp command for showing all the blade system temp
         example:
         CMM>lst
         Status | Module     | Sensor               |    Reading | High Limit |
         ------ | ------     | ------               |    ------- | ---------- |
         OK     | Blade 1    | CPU1                 |   29C/ 84F |   80C/176F |
         OK     | Blade 1    | CPU2                 |   29C/ 84F |   80C/176F |
         OK     | Blade 1    | System Temp.         |   33C/ 91F |   75C/167F |
         OK     | Blade 2    | CPU1                 |   28C/ 82F |   80C/176F |
         OK     | Blade 2    | CPU2                 |   28C/ 82F |   80C/176F |
         OK     | Blade 2    | System Temp.         |   33C/ 91F |   75C/167F |
         OK     | Blade 7    | CPU1 Core A Temp.    |   49C/120F |   80C/176F |
         OK     | Blade 7    | CPU1 Core B Temp.    |   46C/115F |   80C/176F |
                | Blade 7    | CPU2 Core A Temp.    |        n/a |   80C/176F |
                | Blade 7    | CPU2 Core B Temp.    |        n/a |   80C/176F |
         OK     | Power 1    | Temp.                |   40C/104F |   85C/185F |
         OK     | Power 2    | Temp.                |   40C/104F |   85C/185F |
         OK     | Power 3    | Temp.                |   39C/102F |   85C/185F |
         OK     | Power 4    | Temp.                |   40C/104F |   85C/185F |
         OK     | GBSW 1     | Switch               |   41C/106F |   80C/176F |

 -------------------------------------------------------------------------------
  Version 1.01.01 build 071016
 -------------------------------------------------------------------------------
 
 1.Add FIND command for disocver IPMI device
 2.Add FOUND command for list the found IPMI device
 3.update history command execution. use \<#>
 4.add IPMI command group
      sensor(sr)                       Sensor status
      power                            Power control
      acpi                             ACPI status
      lan                              LAN configruation
      fru                              FRU information
      reset                            reset BMC
      ver                              IPMI device version
      raw <netFn> <cmd> [data]         Send IPMI raw command. netFn needs shift 2 bit
 
      Sub Command for lan
        ip [ip]                          get/set IP. Format:###.###.###.###
        mac [mac]                        get/set MAC. Format:##:##:##:##:##:##
        gateway [gateway_IP]             get/set gateway. Format:###.###.###.###
        netmask [netmask]                get/set netmask. Format:###.###.###.###
        snmp [<seq> <ip> [mac]]          get/set SNMP destination
        arp [on|off]                     on/off Gratuitous ARP
        dhcp [enable|disable]            enable/disable DHCP
 
 5.fixed "No enough power" message failed.
 6.fixed if out put DC power over 130A shows wrong value. It's overflow
 7.added short string command instead of long characters typing.
 8.added CMM IP address info in the "cmm status" command
 9.reduced the number of concurrent connections during the command execution. 

-------------------------------------------------------------------------------
 Version 1.00.06 build 071005
-------------------------------------------------------------------------------
 
1.add slave CMM check. Only cmm,sel and user functions are available for slave CMM
2.minor information display changed.

-------------------------------------------------------------------------------
 Version 1.00.05 build 070918
-------------------------------------------------------------------------------
1.Added command history function. press "\" and "/" for executing and displaying
  command history.
2.Added "list" command. Print all available commands
3.Added get/set mac address command in cmm.
4.Updated SEL list message.
5.Added more information in help command (press "?" or "help" in shell mode).
6.Added blade power status in the blade power command. 
7.Added cmm connected info for "cmm status" or "cmm # status" command.
8.Added wild card for ch command. Made it easier to change managed cmm ip. 
  ex:
  case 1, 192.168.100.118 change to 192.168.100.9
    CMM>ch *.9
  case 2, 192.168.100,1 change to 192.168.1.10
    CMM>ch *.1.10 

-------------------------------------------------------------------------------
 Version 1.00.04 build 070908
-------------------------------------------------------------------------------
 1.Fixed a DC current negative bug.
 2.Updated Fan control command as 1,2,3,4 and auto. auto is automatic fan control.
 3.Added ch command in shell mode used for changing IP [username] [password].
 4.Changed prompt from "=>" to "CMM>"

-------------------------------------------------------------------------------
 Version 1.00.03 build 070831
-------------------------------------------------------------------------------
 1.Fixed a parsing bug in shell mode:
   when giving the "blade" then "ver" command, it still shows blade available command.
   It should execute "ver" command.

-------------------------------------------------------------------------------
 Version 1.00.02 build 070830
-------------------------------------------------------------------------------
1.Fixed a problem of taking a long time when running under Linux OS.
  The root cause was the secure random algorithm taking a long time.
  This issue doesn't happen in Windows OS.
  Verified in the following Java Linux versions:
  a.jre 1.5.0_11 (FC4)
  b.jre 1.6.0_02 (FC6)

jre1.*.* should match your jre version.

-------------------------------------------------------------------------------
 Version 1.00.01 build 070823
-------------------------------------------------------------------------------
1.Fixed a bug that created a parse command error in shell mode.
2.Fixed a bug that prevented cmm date/time being set in shell mode.
3.Added ver command.
4.Add runtime info for help command in shell mode.
5.Some minor updates.

-------------------------------------------------------------------------------
 Version 1.0 build 070822
-------------------------------------------------------------------------------
1.First Release	


==============
6.JLine
==============

SuperBladeTool use jline for command history and tab-completion.

JLine is a Java library for handling console input. It is similar in functionality
to BSD editline and GNU readline. People familiar with the readline/editline 
capabilities for modern shells (such as bash and tcsh) will find most of the command
editing features of JLine to be familiar.

For more information, please contact http://jline.sourceforge.net/index.html

===========================
7. Return code for CLI Mode
===========================

Following return code can be used in batch or script file.

STATUS_UNDEFINED                           =  144 
STATUS_DONE                                =    0 
STATUS_CONNECT_FAILED                      =  145 
STATUS_LOGIN_FAILED                        =  146 
STATUS_EXECUTE_PARAMETER_VALIDATE_FAILED   =  147 
STATUS_EXECUTE_EXCEPTION_OCCURRED          =  148
STATUS_EXECUTE_FAILED                      =  149
STATUS_EXECUTE_ON_SLAVE_CMM_OR_UNAVAILABLE =  150
STATUS_EXECUTE_MODULE_NOT_PRESENT          =  151
STATUS_EXECUTE_ONLY_FOR_CMM_CONNECTED      =  152
STATUS_EXECUTE_NOT_SUPPORTED_DEVICE        =  153
STATUS_COMMAND_NOT_FOUND                   =  180 
STATUS_COMMAND_IP_FORMAT_ERROR             =  181 
STATUS_COMMAND_PARAMETER_LENGTH_INVALID    =  182 
STATUS_RESULT_NOT_ENOUGH_POWER             =  215